Connect with us

Cannabis DIY

Quality Cannabis Extraction: Here Is How To Do It

Master quality cannabis extraction with our step-by-step guide. Learn the essentials for top-notch results. Start extracting now!



How to extract Cannabis at your own home

DIY Cannabis Extraction: Step-by-Step Guide for At-Home Enthusiasts

Cannabis Extraction

Cannabis Extraction

What is the best extraction process for cannabis?

Determining the “best” extraction process for cannabis depends on various factors, including the desired end product, efficiency, safety, and scalability. Different extraction methods yield different results in terms of cannabinoid and terpene content, purity, and overall quality. Here are some of the most commonly used extraction processes for cannabis:



Solvent Extraction (Ethanol, CO2, Hydrocarbons):

   – Ethanol Extraction: Involves soaking cannabis plant material in ethanol to extract cannabinoids and terpenes. It’s relatively simple and cost-effective but may also extract unwanted compounds like chlorophyll, requiring additional processing steps.


   – CO2 Extraction: Utilizes supercritical CO2 to extract cannabinoids and terpenes from cannabis. It offers precise control over extraction parameters, resulting in high-quality extracts with minimal impurities. However, it requires specialized equipment and can be expensive to set up.


   – Hydrocarbon Extraction (Butane, Propane, Hexane): Involves using hydrocarbon solvents like butane or propane to extract cannabinoids and terpenes. It’s efficient and yields high-quality extracts but requires careful handling due to safety concerns associated with flammable solvents.


  1. Supercritical Fluid Extraction (SFE):

– Similar to CO2 extraction but utilizes supercritical fluids like CO2 or propane to extract cannabinoids and terpenes. It offers the benefits of both liquid and gas properties, resulting in efficient extraction with minimal solvent residue. SFE is favored for its ability to preserve delicate compounds and produce high-quality extracts.


  1. Rosin Pressing:

– Involves applying heat and pressure to cannabis flower or hash to extract cannabinoids and terpenes. Rosin pressing is a solventless extraction method that’s gaining popularity for its simplicity, safety, and ability to produce high-quality extracts quickly. It’s suitable for small-scale operations and DIY enthusiasts.


  1. Steam Distillation:

– Utilizes steam to extract essential oils, including cannabinoids and terpenes, from cannabis plant material. Steam distillation is a gentle extraction method that preserves delicate compounds but may result in lower yields compared to other methods. It’s often used for extracting terpenes rather than cannabinoids.


  1. Cold Press Extraction:

– Involves mechanically pressing cannabis plant material to extract oils without the use of heat or solvents. Cold press extraction is a gentle method that preserves the natural integrity of cannabinoids and terpenes but may result in lower yields compared to other methods.


Ultimately, the “best” extraction process depends on factors such as the desired end product (e.g., full-spectrum oil, distillate, isolate), available resources, budget, and regulatory considerations. Each extraction method has its advantages and limitations, so it’s essential to carefully evaluate and choose the method that best aligns with your specific needs and priorities. Additionally, adherence to safety protocols and regulatory requirements is crucial to ensure the quality and safety of cannabis extracts.

Cannabis Oil Extraction

Cannabis Oil Extraction

How to extract cannabis at home:

For those curious about delving into the world of cannabis extraction from the comfort of their own home, there’s good news: with the right tools and knowledge, it’s entirely possible to produce your own high-quality extracts. Whether you’re interested in crafting potent oils, concentrates, or tinctures, this step-by-step guide will walk you through the process of extracting cannabis safely and effectively in your own kitchen.



Step 1: Gather Your Materials

Before you begin, ensure you have all the necessary equipment and materials on hand:

– Cannabis flower or trim

– Solvent (e.g., ethanol, isopropyl alcohol)

– Mason jars or glass containers

– Cheesecloth or fine mesh strainer

– Double boiler or slow cooker

– Stirring utensil

– Heat-resistant gloves

– Parchment paper

– Storage containers for the final product


Step 2: Decarboxylate Your Cannabis

To activate the cannabinoids in your cannabis, you’ll need to decarboxylate (or “decarb”) the plant material. Preheat your oven to 240°F (115°C), spread your cannabis evenly on a baking sheet lined with parchment paper, and bake for 30-40 minutes, stirring occasionally. This process converts THCA into THC, making the cannabinoids bioavailable and ready for extraction.


Step 3: Prepare Your Solvent

Choose your solvent based on personal preference and availability. Ethanol is commonly used for its effectiveness and safety, but isopropyl alcohol can also be used if properly purged. Place your decarboxylated cannabis in a mason jar and cover it with your chosen solvent. Seal the jar tightly and let it sit for at least a few hours, shaking occasionally to facilitate extraction.


Step 4: Strain and Filter

After allowing the cannabis to soak in the solvent, it’s time to strain and filter the mixture to remove plant material. Place a cheesecloth or fine mesh strainer over a clean glass container and pour the solvent-cannabis mixture through it. This will separate the liquid extract from the solid plant matter, leaving you with a potent solution ready for further processing.


Step 5: Evaporate the Solvent

Transfer the filtered extract to a double boiler or slow cooker and heat it gently to evaporate the solvent. Be sure to do this in a well-ventilated area with adequate airflow to prevent any buildup of fumes. Use a low heat setting and stir the mixture frequently to prevent scorching and ensure even evaporation. Continue heating until the solvent has evaporated completely, leaving behind a concentrated cannabis extract.


Step 6: Store and Enjoy

Once the solvent has evaporated, you’ll be left with a sticky, resinous substance that contains a concentrated dose of cannabinoids and terpenes. Transfer the extract to a clean, airtight container for storage and use. You can incorporate your homemade extract into a variety of products, including oils, edibles, topicals, or simply enjoy it on its own.


Safety Tips:

– Always work in a well-ventilated area to avoid inhaling solvent fumes.

– Use heat-resistant gloves and handle hot materials with care.

– Keep open flames and sources of ignition away from solvent extraction processes.

– Store cannabis extracts securely and out of reach of children and pets.


With these simple steps and a little patience, you can produce your own high-quality cannabis extracts at home. Experiment with different strains, solvents, and extraction techniques to discover your preferred methods and create custom products tailored to your needs and preferences. Just remember to prioritize safety and responsible consumption practices throughout the extraction process.

Happy extracting!

Continue Reading
Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

Cannabis DIY

The Exciting World Of Cannabis Dips: A New Alternative

Discover the exciting world of cannabis dips! Learn about this innovative, smokeless alternative to tobacco chews! Read More!




Cannabis Dip

The Exciting World Of Cannabis Dips: A New Alternative

Dipping is a common way to enjoy tobacco. But can you dip weed instead? Surprisingly, you can! In recent years, the cannabis industry has started offering cannabis dips as an alternative to tobacco chews. These cannabis chews are made by mixing cannabis extracts with plant fibers like coco coir.

Many dips only have CBD, which doesn't get you high

Many dips only have CBD, which doesn’t get you high

Why You Shouldn’t Make Your Own Weed Dip

It’s tempting to make your own weed dip at home. However, it is not a good idea. First of all, chewing cannabis flower is often unpleasant. The flower must be decarbed to work. Also, chewing raw cannabis is reported to taste bad. Therefore, it’s best to buy professionally made cannabis dip products.

Why Professional Cannabis Dips Are Better

Commercial cannabis dips are not very common. They aren’t as popular as smoking, vaping, or eating cannabis. However, they can help reduce tobacco cravings. These dips sit between your gums and cheek. You can chew them or just hold them in your mouth.

Here’s why homemade dips don’t work well:

– Commercial dips use isolated cannabinoids like CBD or THC. They don’t use the actual cannabis flower.
– Cannabis flower has acidic cannabinoids like THCA and CBDA. These need heat to activate.
– The body doesn’t absorb much THC and CBD from dips. Thus, weed dips often have high levels of THC and CBD. They are more expensive than other products.

Besides being ineffective, raw cannabis can have harmful microbes like Aspergillus or E. coli. Heat usually kills these during smoking, but they may cause harm if ingested. Therefore, chewing raw cannabis is not safe.

Does It Get You High?

This depends on the type of cannabis dip. Many dips only have CBD, which doesn’t get you high. But dips with THC will get you high. The high from THC dips is similar to edibles. Most THC is absorbed when you swallow saliva. This is called first-pass metabolism. The effects take longer to start but last longer than smoking or vaping.

How to Use Cannabis Chew

Using cannabis chew depends on the product. Some come in pouches that you don’t chew. Instead, you hold them in your mouth for 20-60 minutes. They slowly release cannabinoids into your bloodstream. Other products have plant fibers meant to be chewed like tobacco.

For safety and effectiveness, don’t make your own cannabis dips. Buy products made for dipping and follow the instructions on the package.

Potential Benefits, Risks, and Side Effects

Cannabis dips from reputable suppliers may be safe. They offer several benefits:

– No harsh chemicals inhaled into the lungs
– A safer alternative to tobacco
– A slower, more mellow, and longer-lasting high compared to smoking

However, only use products meant for dipping. Making your own dips can lead to risks such as:

– Harmful microorganisms
– Damage to gums and mouth
– Ineffectiveness and wasted product
– Unknown risks from ingesting THCA/CBDA

The Bottom Line

Cannabis dip products are rare and often more expensive than other cannabis forms. Only use dips bought from reputable suppliers. If you want to replace chewing tobacco with something less addictive, CBD chews may help reduce nicotine cravings. Always choose safe, professionally made products for the best experience.

Continue Reading